CONTROLS ON Button, to switch the unit on/ Volume control BAND button, to select the FMI, FMII and FMT memory banks, and the MW and LW wavebands 1-5 button, to select a memory location Cassette compartment FF button , fast tape forwar- ding and cassette eject TS button, to start the Travelsto- re function...
Please read these operating instruc- tions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating in- structions clearer and easier to under- stand. However, if you still have any...
BASIC FUNCTIONS Basic functions Switching on/off There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle’s ignition and it was not switched off using button 1, it will switch on/off simultaneously with the ignition.
Tuning into stations manually You can also tune into stations manual- Briefly press the Storing stations Storing stations manually Select the required memory bank, i.e. FM1, FM2, FMT, or one of the MW or LW wavebands. Use the 1-5 button 4 to select the memory location where you want to store the station.
CASSETTE MODE Cassette mode You can use this device to play stand- ard audio cassettes. Switching to cassette mode Insert the cassette with the open side facing towards the left into the drive until you feel it click into pla- The cassette starts playing.
SOUND AND VOLUME DISTRIBUTION SETTINGS Setting the front/back volume distribution (fader) Keep pressing the AUD button 9 until “FA” appears in the display. button 8 to ad- Press the just the fader (front/back). When you have finished making your changes, wait 6 seconds for the settings to be saved.