Table of Contents
Advertisement
Figure 5. Attaching the sections of the rack inner rails
6. Repeat these steps for the left inner rail.
Install the outer rails
1. Measure the distance from the front rail to the rear rail of the rack.
2. Extend the left outer rail so that it fits snugly into the allotted distance.
3. Adjust both the short and long brackets to the proper distance so that the rail can fit snugly into the
rack.
4. Align the front tabs of the outer rail with the holes in the rack post, as shown in the following figure.
Figure 6. Aligning the outer rails with holes in rack post
5. Push the outer rail into the rack post so that the tabs go through the rack post and hold the rail in
place, as shown in the following figure.
Figure 7. Push outer rail into rack post
6. Attach the back of the left outer rail to the rear rack post through a similar process, as shown in the
following figure.
Chapter 4. Install the appliance into a rack 11
Advertisement
Table of Contents
