Automatic Channel Setup - Philips CCZ190AT99 Owner's Manual

CCZ190comb.QX33 4/5/99 9:51 PM
Adding/Deleting Channels
1
Press the MENU button.
TO ADJUST PRESS { / B
CH123
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
2
Press the PLAY/
CHANNEL.
TO ADJUST PRESS { / B
CH123
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
3
Press the Number buttons or the CHANNEL
tons to enter the channel number you want to add or
delete.
TO ADJUST PRESS { / B
CH23
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
4
Press the FF/SEARCH B button or the
REW(ind)/SEARCH { button to select SAVED (to add
that channel) or DELETED (to delete that channel).
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
Page 11
button or the STOP/ button to select
Automatic Channel Setup (cont'd) 11
1
4
/ but-
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/
STOP/
PRIM.SETUP. Press the
FF/SEARCH B button.
3) Press the PLAY/
STOP/
ORY REVIEW. Press the
FF/SEARCH B button. A list of pro-
grammed channels will appear on-
screen.
4) If all the programmed channels
don't fit on-screen, press the
FF/SEARCH B button. If you do not
press the FF/SEARCH B button
within 10 seconds, the remaining
channels will appear on-screen. (If
there are no remaining channels,
the previous menu will appear.) Or
press the REW(ind)/SEARCH {
button to see the previous screen of
channels.
5) Press the STATUS/EXIT button
once or twice.
5
POWER MENU STATUS/EXIT CLEAR
1 2 3
MEMORY
4 5 6
3
CHANNEL
7 8 9
0 +100
ALT.CH
SLEEP
VOLUME MUTE
SPEED
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR STOP/ PAUSE/STILL 2
Helpful Hint
button or the
button to select
button or the
button to select CH MEM-