A.R.T. Furniture NEO ROUND DINING TABLE Assembly Instructions

Table of Contents

Download this manual

Thank you for purchasing this quality product from A.R.T. Furniture. Be sure to check all

packing material for parts which may have come loose inside the carton during shipment.

Identify and count all parts and compare with the parts list below.

Note: Furniture is heavy, it is recommended that FOUR people assembly this item to

avoid injury or damage.

PART

DESCRIPTION

TABLE TOP

SUPPORT BAR

BASE

M8 X 40mm BOLT

LOCK WASHER (Ø 1/3" )

FLAT WASHER (Ø 1/3" )

5mm ALLEN WRENCH

TOUCH-UP PEN

1)Remove all protective material carefully. Avoid cutting the surface of the furniture while removing the

packaging material.

2)Place X Cross Bar (B) on the Table Base (C) and align with the hole placements. Loosely attach with Bolts

(D) through Lock Washer (E) and Flat Washer (F). Secure all bolts after adjustment made. See Diagram 1:

Page 1

! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !

ASSEMBLY INSTRUCTIONS

918225-4243TP & 918225-4242BS

PICTURE

QUANTITY

NEO ROUND DINING TABLE

07/2017

Table of Contents

Need help?

Do you have a question about the NEO ROUND DINING TABLE and is the answer not in the manual?

Page 1 NEO ROUND DINING TABLE 918225-4243TP & 918225-4242BS Thank you for purchasing this quality product from A.R.T. Furniture. Be sure to check all packing material for parts which may have come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below.
Page 2 ASSEMBLY INSTRUCTIONS NEO ROUND DINING TABLE 918225-4243TP & 918225-4242BS STEP 2: 1) Place Table Top (A) upside down on soft surface. Align Table Base (C) with the hole placements on Table Top (A). Loosely attach Bolts (D) through Lock Washer (E), Flat Washer (F), X Cross Bar (B) with Table Top (A).
Page 3 ASSEMBLY INSTRUCTIONS NEO ROUND DINING TABLE 918225-4243TP & 918225-4242BS Your new product includes a touch-up pen for any minor scratches that may occur. Please follow the directions below for the proper use in adequate ventilation. Important Safety Information: WARNING! KEEP OUT OF REACH OF CHILDREN! ...
Page 4 NOTICE! During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be periodically inspected and re- tightened to prevent damage to the furniture and (or) personal proper- ty or cause injury. Always check to be sure all hardware is attached to the furniture properly and kept tightened at all times.