Advertisement
Pet Hairdryer in Stand
WIRING
WARNING: IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED
BY THE MANUFACTURERS SERVICE AGENT OR A SIMILARLY QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD.
The wires in the mains lead of this Hairdryer are coloured in accordance to
the following code:
Blue Neutral (N)
This appliance is fitted with a 3 pin plug which has a 3amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged,
it should be cut off and disposed of, and a suitable plug fitted as detailed
below.
As the colours of the wires in the mains lead of this Hairdyer may not
correspond with the colour markings identifying the terminals in your plug,
proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the
plug which is marked with the letter 'N' or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in
the plug which is marked with the letter 'L' or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked
with the letter 'E' or has the Earth symbol, or coloured GREEN or GREEN/
YELLOW.
10
Brown live (L)
Advertisement
