Table of Contents
Advertisement
Section 1: Assembly & Set-Up
37298
23998
Tractor Hook-Up
!
DANGER
To avoid serious injury or death:
A crushing hazard exists while hooking-up and unhooking
implement. Keep people and animals away while backing-up
to implement or pulling away from implement. Do not operate
hydraulic controls while a person or animal is directly behind
the power machine or near the implement.
!
WARNING
To avoid serious injury or death:
Lightweight tractors with rear attached implements may need
weights added to the front to maintain steering control.
Consult your tractor Operator's Manual to determine proper
weight requirements and maximum weight limitations.
NOTE: Land Pride's Quick Hitch can be attached to
the tractor to provide quick and easy 3-point hook-
up and detachment. See your nearest Land Pride
dealer to purchase a Quick-Hitch.
3-Point Hook-Up
Refer to Figure 1-4:
1.
Slowly back tractor up to Wood Chipper while using
tractor's 3-Point hydraulic control lever to align lower
lift arm hitch holes with hitch pins (#4)
2. Always disengage power take-off, engage tractor
park brake, shut tractor engine off, and remove
switch key before dismounting from tractor.
NOTE: Clevis pin (#2), linchpins (#3), and hairpin
cotter (#6) are supplied by the customer.
3. Attach lower lift arms to hitch pins (#4). Secure hitch
pins with customer supplied linchpins (#3).
18
WC1503 Wood Chipper 328-085M
Table of Contents
Lock Collar
3-Point Hook-up
Figure 1-4
4. Connect top center link hitch hole to upper clevis
hitch with customer supplied 3/4" clevis pin (#2) and
customer supplied hairpin cotter (#6).
5. Ensure that the lower hitch arms are stabilized to
prevent excessive side movement.
Quick Hitch Hook-Up
Refer to Figure 1-4:
1.
Slowly back tractor up to Wood Chipper while using
tractor's 3-Point hydraulic control lever to lower and
align lower Quick Hitch hooks in-line with and below
hitch pins (#4) and upper center hook in-line with and
below bushing (#1).
2. If needed, adjust top center link to align upper center
Quick Hitch hook just under bushing (#1).
3. Raise Quick Hitch up to catch lower hitch pins (#4) in
lower Quick Hitch hooks and upper bushing (#1) in
upper center Quick Hitch hook.
4. Release Quick Hitch locking handles to secure Quick
Hitch to hitch pins (#4).
Level Wood Chipper
Refer to Figure 1-4:
1.
From the tractor's seat, slowly operate 3-Point
controls to raise skid extensions off the ground
several inches.
2. Manually adjust either one or both of the tractor's
lower 3-Point arm height adjustments to level the
chipper from left to right. Some tractors have only a
single adjusting crank.
3. Manually adjust length of center 3-Point link to level
the Wood Chipper from front to back.
Items 2, 3, & 6 are
Customer Supplied
35287
11/15/19
Advertisement
Table of Contents
