Land Pride WC1504 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Chipper
  5. WC1504
  6. Operator's manual

Land Pride WC1504 Operator's Manual

Wood chipper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Wood Chipper
WC1504
35677
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
328-098M
Operator's Manual
Printed 2/10/21

Advertisement

Table of Contents
loading

Related Manuals for Land Pride WC1504

Summary of Contents for Land Pride WC1504

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 2/10/21...

  • Page 2: Machine Identification

    Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov WC1504 Wood Chipper 328-098M 2/10/21...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture. detailed instructions. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 5: Important Safety Information

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.

  • Page 6: Transport Safely

     Replace parts on this implement correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only.  Always properly match the wheel before leaving the operator’s seat to Do not alter this implement in a way size to the properly sized tire.

  • Page 7: Avoid High Pressure Fluids

    Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Slow moving tractors, and  Never carry riders on the tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
  • Page 8 Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica  Be aware of and follow OSHA  If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 2/10/21...

  • Page 10: Safety Labels

    Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 11 Table of Contents Important Safety Information 35677 35679 818-132C Danger: Thrown object hazard (2 places) 35677 848-840C Danger: Rotating knives 2/10/21 WC1504 Wood Chipper 328-098M...
  • Page 12 Important Safety Information 35677 35679 848-840C Danger: Rotating parts with knives (2 places) Location: Both sides of the feed chute 35677 35679 858-190C Warning: Flying objects hazard (2 places) Location: Both sides of the feed chute WC1504 Wood Chipper 328-098M 2/10/21...
  • Page 13 Do not operate with guard missing Close & secure drive guard before starting 818-205C Rev. B 35679 818-205C Warning: Moving parts hazard 35679 838-093C Warning: Sharp object hazard 35679 818-522C Danger: Moving parts hazard 2/10/21 WC1504 Wood Chipper 328-098M...
  • Page 14 Table of Contents Important Safety Information 35677 818-798C Warning: Pinch point hazard 35678 35680 848-088C Danger: Guard missing (3 Places) WC1504 Wood Chipper 328-098M 2/10/21...
  • Page 15 Table of Contents Important Safety Information 35677 818-335C 3/4" x 4 5/16" Red reflector (2 places) 35294 818-552C Danger: Rotating driveline 35294 818-540C Danger: Guard missing 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 16: Using This Manual

    Always provide model number and serial number when ordering parts and in all The WC1504 model is adapted for 3-Point Cat. l hitch on correspondences with your Land Pride dealer. For 20 to 50 hp (minimum 35 PTO hp for maximum capacity) location of your serial number plate, see Figure 1.

  • Page 17: Tractor Requirements

    Refer to “Lubrication Points” locknuts (#4). Make sure all safety labels are correctly located Pages and legible. Replace if damaged. 3. Tighten locknuts (#4) to the correct torque. 6-11 Refer to section on “Safety Labels” 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 18: Discharge Chute

    (#7) with the four removed 1/4”-20 x 3/4" GR5 cap screws (#8) and hex locknuts (#10). Draw all eight hex locknuts (#10) up snug and then back each one off 1/2 turn. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 19: Driveline Installation

    3. On shear bolt end of driveline (#2), Push push-pins Use steps, grab-handles and anti-slip surfaces when “A” & “B” in and hold while starting to slide universal stepping on and off the tractor. joint onto rotor shaft (#1). 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 20: Tractor Hook-Up

    Quick Hitch hook just under bushing (#1). 3. Raise Quick Hitch up to catch lower hitch pins (#5) in NOTE: Land Pride’s Quick Hitch can be attached to lower Quick Hitch hooks and upper bushing (#1) in the tractor to provide quick and easy 3-point hook- upper center Quick Hitch hook.

  • Page 21: Driveline Hook-Up

    Hitch. IMPORTANT: Check driveline minimum collapsible length before completing “Driveline Hook-up”. Structural damage to the tractor and implement can occur if this check is not made. Refer to “Check Driveline Collapsible Length” on page 18. 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 22: Check Driveline Collapsible Length

    6. Hold inner and outer drivelines parallel to each other. If dimension “A” is greater than or equal to 1", then skip to “Check Driveline Maximum Length” on page 19. Otherwise continue with step 7. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 23: Check Driveline Maximum Length

    Start tractor, raise implement slightly, and drive forward enough to clear the support blocks. 8. Lower implement to ground and shut tractor down using “Tractor Shutdown Procedure”. 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 24: Start-Up Checklist

    A person’s body and/or clothing can become Do not use implement to lift objects; to pull objects such as entangled in the driveline. fence posts, stumps, etc; or to push objects. The unit is not designed or guarded for these uses. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 25: Section 2: Operating Instructions

    Walk, never run. bracket (#1) on the implement. If needed, a sign can • be purchased from your nearest Land Pride dealer. Wear a respirator or filter mask to protect lungs and Refer to “Slow Moving Vehicle Sign (Accessory)”...
  • Page 26 Do not force feed product into the chipper. Refer to Figure 2-2: Land Pride offers the slow moving vehicle sign (#1) as an 11. Once Wood Chipper starts to self-feed, release product and allow rotor knives to pull product in at its accessory should your tractor not be equipped with a removable sign that fits Land Pride’s SMV mounting...
  • Page 27 Land Pride WC1504 Wood Chipper. See “Long Term Storage” on page 32 when storing It is now time to do a running operational safety check. If unit for long periods or at the end of the season.
  • Page 28 1/2"-13 GR5 cap screws (#2). Secure cap screws with existing hex flange locknuts (#3). Tighten locknuts to the correct torque. 6. Raise tractor 3-Point up and remove support blocks. Lower unit until it is resting on its skid extensions. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 29: Section 3: Adjustments

    Push down on rotation chute lock lever (#1) and hold. 2. Rotate discharge chute (#2) in small increments until desired angle of discharge is achieved. 3. Release lock lever (#1). Make sure lever has locked into position and chute cannot rotate. 2/10/21 WC1504 Wood Chipper 328-098M...
  • Page 30 (#13) and rotate that rotor knife to come to a complete stop before working on this unit. be in line with ledger knife (#5). WC1504 Wood Chipper 328-098M 2/10/21...
  • Page 31 (#3) in step 4 below. 4. Tighten GR8 Ledger bolts (#3) to 35-40 ft-lbs. See “Additional Torque Values” on page 38. 5. Continue with step 6 under “Check Ledger Knife Clearance” on page 26. 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 32: General Maintenance Information

    3. Rotate the remaining rotor knives to the top and break at high speeds. Always replace all blades at the same remove them. time. 4. Examine bolts (#5) and rotor knives (#6) for damage and replace with Land Pride parts if needed. WC1504 Wood Chipper 328-098M 2/10/21...
  • Page 33 Reverse Rotor Knives a. Flip rotor knives over so that the sharp edges are Land Pride Rotor Knife & Bolt Part Nos. leading in rotation and reattach them with existing Part No. Part Description 3/8"-24 x 5/8"...
  • Page 34 Table of Contents Section 4: Maintenance & Lubrication 35695 35805 Land Pride Breaker Bar Part No’s. Item Part No. Part Description 328-092H TWIG BREAKER BAR 802-083C HFSS 1/2-13X1 1/4 GR8 Adjust Twig Breaker Bar (Top View) 802-147C HHCS 3/8-16X3 1/2 GR5...
  • Page 35 Make certain discharge chute (#3) is clean. Pull all 3. Unplug feed chute, discharge chute, and rotor as material out of the discharge chute. If necessary, follows: use a stick to unplug a jam. 4. Reattach driveline to tractor power take-off shaft. 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 36: Shear Bolt Protection

    9. Repaint parts where paint is worn or scratched to too fast, rotor knives jamming against a very hard object, prevent rust. Ask your Land Pride dealer for aerosol plugged rotor housing, and high speed start-ups. touch-up paint. They are also available in touch-up...

  • Page 37: Lubrication Points

    Hours Front Flange Bearing Zerks: One Type of Lubrication: Multi-purpose Grease Quantity = As required 35679 Hours Rear Flange Bearing Zerks: One Type of Lubrication: Multi-purpose Grease Quantity = As required 35677 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 38: Driveline U-Joints

    Zerks: One on shear bolt end of driveline Type of lubrication: Multi-purpose grease 35299 Quantity = As required Hours Driveline Outer Shaft Profile Where: Inside surfaces of outer shaft profile Type of lubrication: Multi-purpose Grease 35300 Quantity = As required WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 39: Section 5: Specifications & Capacities

    270 degrees Discharge Height in (m) 58 to 64 (1.47 to 1.63) Color Orange, Green & Beige 55-1/2" 59" (1.41 m) (1.5 m) 60-1/4" (1.53 m) 12-5/8" (32.1 cm) MIN 16-5/8" (42.2 cm) MAX 35696 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 40: Section 6: Features & Benefits

    Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can Self-Feeding System be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 41: Troubleshooting

    Inspect straightness of rotor and rotor shaft. Replace as Bent rotor rotor and/or rotor shaft if bent. Replace twig breaker bar. Bent twig breaker bar making contact “Twig Breaker Bar” on page 30. with rotor. Driveline Vibrates Worn Universal Joint Replace Universal Joint. 2/10/21 WC1504 Wood Chipper 328-098M...

  • Page 42: Section 8: Torque Values Chart

    2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. Additional Torque Values Rotor knife & Ledger, 3/8"-24 x 5/8" GR8 Bolts 35 to 40 ft-lbs. WC1504 Wood Chipper 328-098M 2/10/21...

  • Page 43: Warranty

    This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 44 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

Table of Contents