TABLE OF CONTENTS Contents SAFETY INSTRUCTION * Safety instructions * Battery and Recharging instructions PRODUCT FEATURES MAIN BODY AND ACCESSORIES BATTERY INSTALLATION AND REMOVAL RECHARGING BATTERY GENERAL OPERATION * Starting Operation SIDE BRUSH INSTALLATION CLEANING AND MAINTENANCE * Cleaning Dust Bin * Cleaning Intake TROUBLESHOOTING www.PyleUSA.com...
SAFETY INSTRUCTIONS Before using this product, please read the safety instructions and follow all normal safety precautions. 1. Read this user manual thoroughly and carefully before using this product 2. Keep this manual in your sight. 3. Any operation oppose to descriptions in this user manual may lead to harm to human or this product.
PRODUCT FEATURES This revolutionary Mini Robotic Vacuum Cleaner is equipped with functions suitable for cleaning up oor surfaces of home and o ce, such as wood, tile, and linoleum. The Mini Robotic Vacuum Cleaner is de nitely a good household helper. Random Spiral Along the wall...
Page 6
MAIN BODY AND ACCESSORIES www.PyleUSA.com...
PRODUCT FEATURES 1. Before installing or removing the battery, the product must be disconnected from the power source. 2. Open the battery cover. 3. Insert the battery into the battery cabinet and close the cover. Make sure the cover clips well located in its position. www.PyleUSA.com...
RECHARGING BATTERY 1. Before charging, make sure the battery is correctly installed. 2. The procedure of charging the product is as follows: rstly, connect the adapter output into the DC jack, and then plug into power socket of the other end, a blue light will ash.
GENERAL OPERATION Starting Operation 1. For rst use, take out the insulating strip in battery cabinet as shown in gure below, and then put back the battery cover. 2. Place the product in a room with much free space, and then power it on to do cleaning work.
CLEAN AND MAINTENANCE Cleaning Dust Bin 1. Open the upper cover by lifting the lid near the power on/o button. 2. Put your nger into the dust bin groove and grip to take it out. www.PyleUSA.com www.PyleUSA.com...
Page 11
CLEAN AND MAINTENANCE 3. Open the dust bin lid 4. Take out the inner lter 5. Empty the dirt in the dust bin. www.PyleUSA.com www.PyleUSA.com...
Page 12
CLEAN AND MAINTENANCE Cleaning Dust Bin 1. Rinse the dust bin with tap water.Do not wash it in washing machine,dish-washing machine or other machine. 2. Periodically clean the lter with a soft bristle brush. 3. Reinstallthe lter and the dust bin lid once they get dried. 4.
CLEAN AND MAINTENANCE Cleaning intake After repeated use for some time, dirt and dust might accumulate around the intake of the product, to ensure its best cleaning e ciency and constant air ow it should be cleaned periodically. 1. Remove the external power source. 2.
TROUBLESHOOTING Problem Possible Cause Solution 1. Recharge the battery Red LED stays 1. Battery Low condition 2. Replace the robot on after power on 2. Main body is picked up the oor 1. Clean the dust bin Vacuum on but 1.
Need help?
Do you have a question about the PUCRC26BUK and is the answer not in the manual?
Questions and answers