Switching On The Appliance; Setting The Temperature; Alarm Function - Siemens KA N Series Installation Instructions And Instructions For Use

Switching on the appliance

When connected, the appliance is switched on. A
warning signal sounds.
Press the Alarm/lock button. The warning signal
switches off.
Display "alarm" goes out when the appliance has
reached the set temperature.
The preset temperatures are reached after several
hours. Do not put any food in the appliance
beforehand.
The factory has recommended the following
temperatures:
Freezer compartment: -18 °C
■
Refrigerator compartment: +4 °C
■

Setting the temperature

Freezer compartment
The freezer compartment can be set from -14 °C to
-24 °C.
We recommend a setting of -18 °C.
The value last indicated is saved by the system.
1. Press the "freeze" button until "freeze" is lit on the
freezer compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
Refrigerator compartment
The refrigerator compartment can be set from +2 °C
to +8 °C.
The temperature can be set at 1 °C intervals.
The value last indicated is saved by the system.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1. Press the "cool" button until "cool" is lit on the
refrigerator compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.

Alarm function

Press the "alarm/lock" button to switch off the warning
signal.
In the following cases an alarm may be actuated:
Door opening alarm
If the appliance is left open for longer than one minute,
the door alarm switches on. Close the door or press the
Alarm button to switch the warning signal off again.
Temperature alarm
The temperature alarm switches on if the freezer
and refrigerator compartment is too warm and the food
is at risk of thawing.
The acoustic and optical signals may be actuated
without risk to the frozen food when:
The appliance is switched on.
■
Large quantities of fresh food are placed
■
in the freezer.
en
11