Automatic Channel Setup - Philips VCB611AT Owner's Manual

14 Automatic Channel Setup (cont'd)
Reviewing Memorized Channels
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
TV
CABLE TV ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
CH MEMORY REVIEW, then press the F.FWD/B button.
A list of programmed channels will appear on the screen.
If all the programmed channels don't fit on the screen, press
the F.FWD/B button to see the remaining channels. Then
press the REW(ind)/s button to return to the first screen of
channels.
If you do not press any buttons within 10 seconds, you will
either go to the next screen of channels or you will return to
the previous menu.
5
Press the STATUS/EXIT button once or twice to exit.
VCB611 only
POWER VCR/TV EJECT
1
TV
PLAY
REW F.FWD
STOP
2
STATUS/EXIT
1 2 3
4 5 6
7 8 9
ENTER ALT. CH
0
SPEED TIME SEARCH PAUSE/STILL
REC/OTR MEMORY SLOW
3-4
5
CH
VOL
MUTE