Table of Contents
Advertisement
ç Contents
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion,
because the camera continues to focus on the subject and adjust
the exposure as long as you press the shutter button halfway.
●
Focusing may not be possible in some shooting conditions.
●
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
●
If optimum exposure cannot be obtained, the shutter speed and
aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
●
[AF-Point Zoom] on the [
Not available when using the self-timer ( = 75).
●
1
Configure the setting.
●
Press the [
choose [Servo AF] on the
[
] tab, and then choose [On]
( = 52).
2
Focus.
●
The focus and exposure are
maintained where the blue AF
frame is displayed while you
are pressing the shutter button
halfway.
] tab ( = 52) is not available.
Still Images
] button,
132
Movies
Advertisement
Table of Contents
