Bissell 2007 Series User Manual page 13

Cleaning Machine After Use
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
First, fill the Clean Water
Tank with warm tap water
and then empty it all to
rinse. Then fill again with
warm tap water and return
the tank to the machine.
Twist cap back on tightly.
To flush and rinse the machine: Turn the machine ON and
press the trigger for 15 seconds while making back and
forth passes on a section of carpet.
Finally, release the trigger and extract the water. See page
12 to clean the Dirty Water Tank from the water that was
just extracted.
www.BISSELL.com
13