Defrosting; Cleaning Your Oven - DeLonghi AM823MI6-P00F Instructions Manual

23l
Table of Contents

Advertisement

DEFROSTING

1.
Fully unwind the cable, plug in and switch on. The microwave will
emit a single bleep and the display will show 0:00.
2.
Place the food to be defrosted in a suitable microwave safe
container and cover.
3.
Pull open the door, place the container in the centre of the circle
marked on the floor of the oven and securely close the oven door.
4.
Press the DEFROST button to set the oven to defrost at 35% power
for 30 seconds. Each successive press of the button will increase
the defrost time by 30 seconds (up to 5 minutes) and then by 1
intervals between after 5 minutes. The maximum defrost time that
can be set is 60 minutes.
5.
Press the START button, a bleep will be heard, the microwave will
start to defrost and the timer will start to count down.
6.
Defrosting can be interrupted to stir contents or check defrost
progress by opening the door.
defrosting will restart when the door is closed and the START button
is pressed.
7.
After the defrost time has finished, five bleeps will sound and the
microwave will turn off automatically. A bleep will sound every two
minutes until the oven door is opened.
8.
Allow food to stand for 30 seconds to one minute before stirring or
serving.
9.
The oven can be paused at any time by briefly pressing the STOP /
CANCEL button during operation or by opening the door. Pressing
the STOP / CANCEL button twice will clear settings and stop the
cooking programme.
CLEANING
Clean the oven and seals to remove food debris on a weekly basis and
more often if required. Failure to maintain the oven and seals in a clean
condition could lead to deterioration of the surface or seals, adversely
affect the life of the oven and possibly result in a hazardous situation
(possible release of microwave energy).
Clean the oven after each use, if food is cooked uncovered and
especially if fatty foods are cooked.
1.
Switch off, unplug the oven and allow the oven to cool completely.
2.
Wipe surfaces and seals with a soft damp cloth (not wet). Do not
use abrasive cleaning products or metal scrapers to clean the glass
door of the oven as this could damage the surface and cause
breakage. Do not immerse in water. Do not use a steam cleaner.
Always allow surfaces to fully dry before using the oven again.
3.
Version 2 3/6/2019
Settings will be retained and
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents