Mts Broadcast Stereo System - Philips SVB106AT Owner's Manual

Make sure:
The VCR is on and is in VCR position. The VCR/TV light will
appear. If it does not, press the VCR/TV button once.
1
Press the MENU button repeatedly until MENU 2
appears.
- M E N U 2 -
B AUDIO OUT
TV STEREO [ON]
SAP
2
Press the PLAY button or the STOP button repeatedly to
select TV STEREO or SAP. Press the F.FWD button,
then [ON] will appear to the right of your selection.
- M E N U 2 -
AUDIO OUT
B TV STEREO [ON]
SAP
3
Press the COUNTER RESET/EXIT button.
4
To play a tape, press the PLAY button. Or, to record,
select the channel to be recorded using the CHANNEL
o o /p p buttons, then go to step 5.
5
Press the RECORD button to start recording.
MTS Broadcast Stereo System (cont'd) 43
1
4
5
2
Helpful Hints
• You can only receive and record in
stereo or second audio programs
that are broadcast in second audio
or stereo. You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 42 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
• If you select second audio when
second audio is not available, the
VCR will record normal audio.
4
3