Hookups Without A Cable Box/Direct Broadcast System - Philips SVB106AT Owner's Manual

Hookups Without a Cable Box/Direct Broadcast System (cont'd) 7
3
Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the
VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on
type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
Antenna
or Cable
4
Plug in the AC power cords of the TV and the VCR.
5
Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever
channel is not used or least used in your area. Set the TV to the same channel. For
example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on
channel 03.
6
You are ready to turn on the VCR. Please go to page 11 before turning on the
VCR.
RF coaxial cable
ANTENNA IN Jack
(on back of TV)
example only