Chopped
vetch
and
mixture
Peat
Manure
Table 11. Densities of the main materials to be transported
The semi-trailer shall be unloaded when it stands on a solid and even surface, with the hand-brake of
the tractor pulled up.
The load shall be discharged in accordance with the following procedure:
open the tailgate of the body using the hydraulic cylinders after opening the hydraulic locks, and
they allow a part of the load to spill;
lift the body and discharge the load;
lift the body at once to the end without stops and jerking actions because otherwise the semi-
trailer may turn over;
lower the body fully;
close the tailgate and fix it by closing the locks of the hydraulic cylinders.
ATTENTION!
Staying in the unloading area is prohibited.
Semitrailer's tank filling in process goes according these steps:
a) Left side valve must be switched down (6th o'clock Picture 2);
USER MANUAL Tractor semitrailers PTL
oat
150-180
300-500
600-1200
6.3.
Unloading tipping semitrailer
Picture 1. The discharge port in the tailgate: 1 – fixing bolt; 2 – handle; 3 – valve
6.4.
Sandstone, chalk
Sugar
Paper
Filling in a tank
2400
800
700-1200
22