Operating Notes - Prestige medical DT-30 Instructions Manual

mEASURINg IN bODY mODE
1. Press the O/I button. The display is activated to
show all segments for 2 seconds.
2. The last measurement reading will automati-
cally be shown on the display for 2 seconds with
the "M" icon at the lower right corner.
3. When the C° or F° icon is
flashing, a beep sound is heard
and the thermometer is ready
for measurement.
4. Point the thermometer at the area above the
eyebrow of the forehead with a distance of no
more than 5 cm (2 inches). If the forehead is
covered with hair, sweat or dirt, please remove
the obstacle beforehand to improve the reading
accuracy.
5 cm
5. Press the START button.
6. After 1 second a long beep will verify the
completion of measurement.
7. Read recorded temperature from the display.
mEASURINg IN ObjECT mODE
1. Follow steps 1-3 above, then aim the ther-
mometer at the center of the object you want
to measure with a distance of no more than 5
cm (2 inches). Press the START button. After 1
second a long beep will verify the completion of
measurement.
2. Read recorded temperature from the display.

OPERATINg NOTES

• For more accurate readings, the patient and
thermometer should remain in a steady room
condition for 30 minutes before measurement.