Description Of Functions - Ganz ZC-Y15PH4 Instructions For Use Manual

Image sensor camera

Hide thumbs

Table Of Contents

Table of Contents

1 Flange back adjustment wheel

If focus needs to be adjusted after the lens has been mounted, loosen the flange back lock screw (9) and

rotate the adjustment wheel to adjust.

2 DC iris level adjust POT

Adjust DC iris level manually.

3 D D/N (digital day/night) select switch

The camera image digital processing produces well-lit images even in low illumination environments. While

this function is operating, the image will be monochrome. When the environment in which the camera is

being used brightens the image will be in color.

ON :

Day/Night automatic switching (low illumination: monochrome; normal lighting: colour)

OFF : Fixed to colour image

Easy Focus adjustment

Be sure to adjust the lens focus only in a well-lit environment. When using a DC iris lens, set the auto-iris

mode switch (0) to AES, and then make the focus adjustment. After the adjustment, be sure to return

switch (0) to DC.

4 FLC switch

ON :

Shutter speed to be fixed at 1/120 sec.

OFF : Normal position (Fixed at 1/50 second)

5 BLC (Back Light Compensation) mode switch

When strong light (sun, sky, illumination, etc.) is present behind the object being

photographed, the object will appear dark. In this case, put this switch in the

position.

BLC

6 Sync mode switch

For setting the sync mode.

L.L. :

Line Lock mode

INT. : Internal sync mode

7 Line phase adjustment POT

This POT is used to adjust phase when the Sync mode switch is set to

8 Auto-iris output connector

For connecting the cable of an auto-iris lens. The pin assignment is following.

No.

CONTROL –

CONTROL +

DRIVE +

DRIVE –

9 Flange back lock screw

0 Auto-Iris mode switch

For switching the output from the auto-iris connector (8).

DC :

To be set when using a non-amp auto-iris lens.

AES :

To be set when using fixed iris lens

VIDEO :

To be set when using an auto-iris lens a built-in amp.

A Video output connector

Connected to the TV monitor with a coaxial cable.

B Power input terminal

Use a DC 12 V (10.8 to 13.2 V) or AC 24 V (21.6 to 26.4 V, 49 to 51 Hz) power supply. (ZC-Y15PH4)

Caution: Use only with a 24 V AC power supply marked class 2 or +12 V DC power supply

AC Power cord: Use AC 230 V, 50Hz (ZC-Y15PH3)

Caution: Use only with a 230 V AC

ZCY15PH4Y15PH3.p65