Troubleshooting - Philips AZ9225/05 User Manual

TROUBLESHOOTING

WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Problem
No power,
playback does
not start
nF dISC
indication
no dISC
indication
HoLd indication
and/or no reaction
to controls
20
Possible cause
Batteries
Batteries inserted incorrectly
Batteries are empty.
Contact pins are dirty.
Mains adapter
Loose connection
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off.
CD-RW (CD-R) is not recorded
properly.
The CD is badly
scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up.
HOLD is activated.
Electrostatic discharge
Solution
Insert the batteries
correctly.
Change the batteries.
Clean them with a cloth.
Connect the adapter
securely.
batteries.
Use FINALIZE on the
CD recorder to complete
the recording.
Replace or clean the CD.
Wait until the lens has
cleared.
Deactivate HOLD.
Disconnect the set from
power supply or take out
the batteries for
a few seconds.