Additional Monitor Settings; Set Fine Tune; Set Channel Skip - CYBEX CP-20665 Owner's Manual

Additional Monitor Settings

After you set up your monitor you may wish to adjust these additional settings. In this section you will set up the
following:
•

Set FINE TUNE

•

Set Channel Skip

•
SWAP Channel
•
Restore Factory Settings
Set FINE TUNE
A channel can be fine-tuned manually to improve Channel Reception. To fine tune a channel:
1. Select the channel you wish to fine tune.
2. Press the MENU to display the MAIN MENU.
3. Press the UP and DOWN arrow keys to highlight TV SETTING - press MENU to select.
4. Press the UP and DOWN arrow keys to highlight FINE TUNE - press MENU to select.
5. Press MENU to highlight to frequency bar
6. Press the LEFT and RIGHT arrow keys to adjust reception manually.
7. When the best reception is achieved press EXIT to set.
8. Press EXIT to return to the previous menu.
Set Channel Skip
If the Channel Search process has stored unwanted channels, these can be skipped so not to appear when
using the CHANNEL UP and CHANNEL DOWN keys. To set the channels to be skipped:
1. Select the channel you wish to be skipped.
2. Press the MENU to display the MAIN MENU.
3. Press the UP and DOWN arrow keys to highlight TV SETTING - press MENU to select.
4. Press the UP and DOWN arrow keys to highlight SKIP THIS - press MENU to select.
5. Press the LEFT and RIGHT arrow keys to select ON or OFF.
6. When the best reception is achieved press EXIT to set.
7. Press EXIT to return to the previous menu.
8. Press EXIT to return to exit the MAIN MENU.
NOTE: To restore a channel that you have previously Skipped you must research all channels as described
above under "AUTO SEARCH".
5-7