2-in-1 solution providing you with both an ordinary staircase and a sophisticated stairlift – be it in your home, office or other place. This is an original user manual for your new FlexStep V2. Hereinafter we use the term FlexStep for FlexStep V2, if nothing else is specifically indicated.
Resellers who purchase the FlexStep V2 product ( ) directly from Liftup: for a period of one (1) year from the date of shipment from Liftup, the Product will substantially conform to Liftup’s standard published specifications for the Product and the Product hardware will be substantially free from defects in materials and workmanship.
Page 6
Product with hardware or software products, information, data, systems, interfaces, services or devices not made, supplied or specified by Liftup; (b) the operation of the Product under any specifications other than, or in addition to, Liftup’s standard published specifications for the Product;...
2.1 Regulatory approvals FCC/IC The radio module contained in the FlexStep V2 and associated remote comply with the FCC Part 15.249 and the Industry Canada requirements RSS-GEN, RSS-210 The radio module contained in the FlexStep V2 and associated remotes complies with Part 15 of the FCC rules and with Industry Canada license exempt standard(s).
Page 8
(2) This device must accept any interference received, including interference that may cause undesired operation. The radio module contained in the FlexStep V2 and associated remotes are SAR test excluded according to FCC KDB 447498, RSS102 and EN 62479 at separation distances larger than 5 mm and less than 50 mm.
USER MANUAL – FLEXSTEP V2 – AUS VERSION 1.0 3. Labelling of the equipment Insert copy of CE certification mark here Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
6. Technical specifications Position at bottom landing Staircase Position at top landing All scale drawings for 2+1, 2+2, 3, 3+1, 4, 4+1, 5 and 6 step FlexStep V2 in standard widths are available at https://www.liftup.dk/en/products/flexstep/ Technical specifications Power: 110 - 240 V/50 Hz (1.1A) Max: 90 W, Standby < 6 W...
Do NOT transform the FlexStep from stairs into platform or the reverse when persons or objects are on the stairs. So as to avoid personal injury it is NOT permitted to use the FlexStep V2 when someone is at risk of being injured by crushing, cutting, falling, slipping, or similar.
Infrared sensors are fitted between the steps in order to avoid crushing between them. Infrared sensors prevent crushing between the steps If the IR sensors are disrupted when the FlexStep V2 moves from staircase to platform or the reverse, movement will stop, and an audible alarm will sound (see section 11.8).
Keep the associated remote control (supplementary equipment) dry and do not subject it to severe blows. Cleaning may only be performed using a well-wrung cloth. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
The bolt may be difficult to pull out, because of pressure on the door actuator. 5. Now the door can be moved freely Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
FlexStep, or to repair it. These actions MUST be undertaken by an authorised service technician. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
The FlexStep is a unique 2-in-1 application designed to function both as an ordinary staircase and as a wheelchair lift. Basically, the FlexStep V2 is an ordinary staircase, but with the simple pushbuttons it is easily folds up/down to a platform and is transformed to a wheelchair lift.
(optional equipment) Lifting platform down Emergency stop Liftup recommends that the auto-return function is turned off in all cases when there is no safety at the top level. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
High tone followed a deeper tone Low tone followed by higher tone 3 identical tones Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
DO NOT put the battery in trash. When disposing, comply with local ordinances or regulations Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
Page 31
If the power has been disconnected from the handset or the receiver for a long period of time, it may be necessary to calibrate the system (pair the two units), see section 13. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
6. If you need to pair several remote controls to the receiver, repeat step 2 above. Alternatively: Press the Connect (S4), if the Remote is open Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
Page 33
2. When the control LED begins to flash rapidly 10 times, the receiver has been reset. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
1. Press the S4 on the receiver for more than 10 seconds, see photo in section 14.1. 2. When the control LED begins to flash rapidly, the receiver has been reset. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
USER MANUAL – FLEXSTEP V2 – AUS VERSION 1.0 17. Service log 17.1 Service logbook The logbook shall be kept together with the lift. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
The fields must be filled out and the service technician/engineer/control authority enters an electronic acceptance after each visit. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
Need help?
Do you have a question about the FlexStep V2 and is the answer not in the manual?
Questions and answers