Citizen H01 Series Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual.
Component identification
[H01*/H05*]
Reception result
indication (NO)
Hour hand
Second hand
[H03*]
Reception result
indication (NO)
Hour hand
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
H01*/H03*/H05* Abbreviated instruction
Reception-in-progress
indication (RX)
Reception result
indication (OK)
Minute hand
Date indication
Crown
Button
A
0 1 2
Reception-in-progress
indication (RX)
Reception result
indication (OK)
Minute hand
Crown
Button
A
0 1 2
Checking the power reserve
1.
Push the crown in to position
2.
Press and release the lower right button
The second hand moves to indicate the power reserve.
Pointing "OK" or "NO" after moving
clockwise
Pointing "OK" or "NO" after moving
counterclockwise
• "OK" and "NO" indicate the time signal reception result. They have no
relation to the charge level.
3.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Crown's position
Checking the signal reception result
• This watch receives the time signal from the Japan station every day to adjust
time automatically.
1.
Push the crown in to position
2.
Press and release the lower right button
The second hand moves to indicate the result of the last reception.
Indication
OK
NO
• Try signal reception following the steps in
(on-demand reception)
3.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Receiving the signal manually (on-demand reception)
Crown's position
• It takes 2-15 minutes to finish reception.
1.
Push the crown in to position
2.
Press and hold the lower right button
The second hand points "RX" and signal reception starts. The second hand
returns to normal movement after finishing reception.
Reception was successful
Reception failed
• Press and hold button
reception.
1/3
.
0
Second hand movement
Power reserve is sufficient.
Charge immediately
.
0
Reception result
The reception was successful.
The reception failed.
if the last reception failed.
.
0
The time will be updated.
The time is not corrected and the previously set time
resumes.
until the hands start moving rapidly to cancel
A
.
A
Power reserve status
to finish the
A
.
A
Receiving the signal manually
to finish the
A
for 2 seconds or more.
A