Table of Contents
Advertisement
Connecting the Controller
Turn Off Power and Remove the Plug from the Power Source
• To fit the controller simply hold the socket on the heated throw with one hand and
push the controller plug all the way until it clicks in. There are grooves to guide.
• To remove the controller, hold the corner of the heated throw and pull the controller
plug directly out. Do not pull the controller cable.
• Do not fold, roll or kink the cable. Allow the cable to hang freely.
• Ensure the cable is not pulled so tight that it bends hard at the heated throw
connector end.
Before First Use
Remove all packaging parts before initial operation.
When the heated throw is used for the first time, it can smell of plastic, but this disappears
after a short time. Before using for the first time, ensure that the temperature control
switch is in the OFF position. Use the appliance as a heated throw blanket only. This
appliance is only for warming human bodies.
The best results are expected when the blanket is placed onto a body before switching
it ON. Do not place the switch under a cover.
Pre-heating time takes about 10-30 minutes depending on ambient room temperature.
7
Advertisement
Table of Contents
