Dimplex DHDEHT Instruction Manual page 8

Heated Throw Placement
• Place the heated throw flat ensuring that it does not overhang anywhere. Avoid
placing the heated throw where it can become folded or crumpled. The heated
throw may only be switched on when it is flat and unfurled. It is recommended to
preheat it for 10 - 30 minutes.
• Once the heated throw has been placed correctly in position, connect the
controller supply plug to a suitable power outlet. Ensure the controller is set to
OFF. Switch the power ON. Select the desired heat setting on the controller. The
indicator lamp on the switch indicates that the blanket is ON.
• Only operate the heated throw with the supplied controller.
CAUTION: The electronic components inside the switch may lead to a slight
warming of the switch when the product is on. Therefore the switch must not be
covered or placed on top of the warming pad when it is in operation.
NOTE: Do not plug into a powerboard, double adaptor or the like. The power plug
must be inserted directly into the wall power socket.
IMPORTANT:DO NOT COVER THE CONTROLLERS AT ANY TIME.
Keep the controller away from external heat sources. i.e. heaters, fireplaces etc.
8