Table of Contents
Advertisement
Connecting the Controller
Turn Off Power and Remove the Plug from the Power Source
• To fit the controller simply hold the socket on the blanket with one hand and push
the controller plug all the way until it clicks in. There are grooves to guide.
• To remove the controller, hold the corner of the blanket and pull the controller plug
directly out. Do not pull the controller cable.
• Do not fold, roll or kink the cable. Allow the cable to hang freely.
• Ensure the cable is not pulled so tight that it bends hard at the blanket connector
end.
NOTE: Ensure that the electric blanket is sized to suit your mattress i.e. queen sized
electric blanket must be used on a queen sized mattress.
Do not use a single bed blanket on a Double, Queen or King size mattress.
The blanket top must not hang over the edges of the mattress.
7
Advertisement
Table of Contents
