Laserworld Net OEM User Manual page 24

If the function is deselected with the 'none' switch, the values in the field behind will be used.
Different functions can be controlled by one and the same DMX-channel.
For example, 'Size' and 'Rotation' controlled by the same DMX-channel can create interesting
effects.
But it is not possible to set the same function to more than one DMX-channel.
Showselect (Low)
This channel is used to select sequence number 1 to 16.
This function cannot be disabled.
Showselect (High)
With this channel, a bank 1 to 16 can be controlled, which is multiplied with the 'Low' value to
acces the full range of 256 sequences.
Framerepeat
Animation speed can be controlled within limits by the use of this channel.
If not used, the value in each show entry of the table in show management will be taken.
Size
Size controls the projection angle (zoom).
For safety reason, size cannot be set below 10% of the maximum.
Size (X) und Size (Y)
Size control for both projection axes X and Y individual.
The difference to 'Size' is that 255 is the maximum, 115-140 is minimum (10%) and values below
115 are inverting the display of the axis.
This can be used to invert orientation of the projected image.
Offset (X) und Offset (Y)
An offset to the position of the picture.
At maximum size, a picture may be cropped at the edge, when an offset is added.
24