A/V Control - Icecrypt S3250CCIHD Manual

Menu Lock means that when user wants to
2
enter "Installation" menu, they have to
enter Password. If the setting of "Menu
Lock" is "On" it means user has to key in
password, set "Off" means unlocked.
Channel Lock means that when user wants
3
to view the locked channels, they have to
enter the password. If the setting is "On",
viewing the channels with lock mark will
show up an option on the screen and ask
for the password. If the setting of "Channel
Lock" is "Off", the Lock function is disabled.
New Password is used for changing
4
password; you can enter a new password
in this option by using the number keys.
After you enter a 4 digit number, the
highlight will auto skip to Confirm Password
and ask you to input the new password
again. If the password is correct, the screen
will show up a message of "Saving Data,
Please Wait..." After saving and draw back
to "System Setup" menu, the change is
complete.
Press [exit] key to return from the "Parental
5
Lock" menu.

11.3 A/V Control

When you enter to "TV System" option, you will
see a screen like below:
 Display Mode is for switching the receiver
output video resolution. Highlight it and
press left or right key, it will switch video
resolution by the sequence "Auto-> by
native TV->480i->480p ->576i-> 576P->
720p-50-> 720p-60-> 720P-60->
1080i-50->1080i-60
->1080p-50->1080p-60"..This effect is the
same as pressing V.Format Key in Live TV
and the last saved setting will be stored for
all channels.
Auto means system will set the video
output resolution according to the
programme it's playing. As the resolution
changes between programmes you may
see the TV screen flickering.
By Native TV means output will be set to
the HDMI TV's max supported resolution. If
system is not connected to a HMDI TV, it
will set resolution to be default.
 Aspect Mode is for switching the screen
aspect ratio mode between: 4:3 PS / 4:3 LB
/ 16:9/Auto. You can press [Left/Right] key
to select each mode. 16:9 will provide user
pillar box mode it means user use 16:9 TV
to display but need to see a 4:3 full display
picture. System will force press wide
22