Identification Of The Machine - Bonatti LSN Series Operation And Maintenance Manual

1. IDENTIFICATION OF THE MACHINE

Each Snow Blade is identified by a serial number and by the Model that are written
in the nameplate located on the outside part of the door.
IMPORTANT: in your requests to the Manufacturer always refer to the name plate
and specify the name plate data.
On some components of the Snow Blade that have not been directly made by the
Manufacturer, name plates identifying the details of the component and the details
of the manufacturer of such component according with CE specifications, are
applied.
2. ROAD CIRCULATION
The road circulation is subject to the law and regulations in force.
The manufacturer of the equipment is not responsible for the consequences of the
non-observance of the rules of the road.
Prescriptions for road circulation:
Yellow pivotable headlight on
Make sure that the mechanical locks of the Snow Blade are fastened.
Fix the tie rods of the farm tractor power-lift by means of the
special adjuster in order to avoid dangerous oscillations during the transport.
The non-use of the mechanical lock devices may cause serious damages to things
and persons.
N.B. The Company Bonatti declines any civil and penal liability for damages to
persons and things that may arise from the non-observance of the road circulation
rules.
N.B. For safety reasons we suggest the biggest
caution on the road to avoid unexpected
oscillations and side skids.
- 3 -