Maintenance Manual Of The Snow Blade - Bonatti LSN Series Operation And Maintenance Manual

10. MAINTENANCE MANUAL OF THE SNOW BLADE

The maintenance is an essential condition to get the best safety performances of
the Snow Blade, therefore it must be made regularly. Each component of the
Snow Blade that may be damaged or malfunctioning must be replaced or rebuilt.
For spare part replacement get in touch with Company Bonatti, as the use of non
original spare parts may endanger the functionality of the Snow Blade and cause
irreparable damages to things and persons.
10.1. MAINTENANCE FOR DEAD PERIOD AND/OR STORAGE
In case of dead period and/or storage of the machine:
wash the Snow Blade accurately;
lubricate all unpainted parts, slits, sliding flanges and guides;
lubricate all grease niples;
store in a dry place.
10.2 LUBRICATION OF THE SNOW BLADE COMPONENTS
COMPONENT
Fulcrum pin
Positioning hydraulic
jack
11 MAIN FAILURES
MAIN FAILURES
Hydraulic jack
controls do not work
The snow blade
moves without
operating the
controls
Fitting is leaking
OPERATION
Greasing
CAUSE
Hydraulic pump
demaged
Cylinder gasket worn Replaced gasket
Fitting is slack
− 14 -
WORK HOURS
10 h
CURE
Replace pump
Tighten the fitting