Advertisement
Location of the SSO
2.
• Make sure there is enough space around the SSO to enable a safe installation and
steady airflow.
• The SSO should not be located in direct sunlight.
• It is recommended that the SSO are mounted close to the PV-Panels.
Advantages:
• Increased safety since the SSO can disconnect the PV-pannels from the DC-link if a
failure occurs.
The cables from each SSO can be merged together through a distribution board so less
•
cables are needed between the SSO and the inverter
PV connection
3.
• Connect the Sunclix-contacts to the cables. The one marked with a + to the PV+ cable
and the one marked with – to the PV- cable.
• Connect the Sunclix-cables to the SSO
.
Page 4 of 7
Advertisement
