3B Medical Luna Series Manual

3B M Luna & RESmart Series: Single Battery C
edical
REQUIRED COMPONENTS
Freedom TM CPAP Battery Kit

150W Sine Wave Power Inverter (inverter)

CONNECTION INSTRUCTIONS
Plug the DC input cord into the DC OUT jack of the battery.

Plug the inverter into the DC input cord.

Plug the AC power cord of the PAP device into the inverter.

Turn the PAP device on and it should begin functioning.

The digital display screen will show the charge level of the battery. You may press the charge level indicator

button to illuminate this screen. It will stay illuminated for a few seconds at a time.
When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.

Image shows connection
to a 3B Medical Luna device.
The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge
other small electronic devices with the b attery. The inverter is not proprietary to the Freedom
used with other external batteries.
TM
OPTIONAL FREEDOM
     Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).
SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.
    
DC OUT JACK
CPAP BATTERY CHARGING ACCESSORIES
BATTERY POWER SOLUTIONS
PAP AC POWER CORD
150W SINE WAVE
POWER INVERTER
DC INPUT CORD
TM
CPAP Battery and can be
onnection
Page 1 of 2 June 2016