Connecting The Client Network Cables - Dell EqualLogic FS7600 Series Installation And Setup Manual

Dell EqualLogic FS7600 Installation and Setup Guide

Connecting the Client Network Cables

For each controller, refer to the luggage tag attached to the appliance to identify the network ports for the
different switches: client, SAN, and internal. See
connections to support failover and to eliminate a single point of failure.
• On the left-side controller, connect the top-left client ports to one client switch, then connect the bottom-left
client ports to a different client switch.
• On the right-side controller, connect the top-left client ports to the same client switch as the bottom-left
client ports on the other controller.
• Connect the bottom-left client ports to the same client switch as the top-left client ports on the other
controller.
Figure 9 for guidance on how to distribute the client
4 Network Cable Connections
21