Si-93
1. Supplementary Explanation
1.1
Field Setting, Service Mode Operation
1.1.1
Field Setting
Initial setting (mode
Nos. 17, 27, 18, 28)
Supplementary Explanation
Unit No.
Setting position No.
Setting switch No.
4
3
6
1, 7
Step 1
With equipment in normal mode, press the
setting mode.
Step 2
Mode No.: UP
Use [MODE] and [AIR VOLUME] to select desired mode No.
Step 3
To setting heat reclaim ventilation units by group, press
No.
Step 4
Press
button to select desired setting switch No.
Step 5
Press
button to select desired setting position No.
Step 6
Press
button to enter settings.
Step 7
Press
button to return to normal mode.
Field setting mode
5
2
button for more than 4 seconds to enter field
↔
Mode No.: DOWN
Supplementary Explanation
Mode No.
(HL039)
button and select desired unit
53