Waterworks B5 User Manual page 14

2
3
1
2
5
Dampen a dry cloth with a neutral detergent
solution and use it to clean the NSK and cold
water baffle. Then, wipe them with the clean cloth
repeatedly until no detergent is left.
6
Grip both sides of the panel, pull it down to remove
1
it, and then rotate the cold and hot water faucets
counterclockwise to remove them. Wash the faucets
using a neutral detergent, dry them with a soft cloth,
and then reinstall them and the panel.
CAUTION
Do not use a sharp object to clean the inside of the
faucets. If the rubber packing inside the faucets is
damaged, there is a risk of leaks.
NOTE
Depending on the model, there may not be a panel.
7
Dampen a dry cloth with a neutral detergent
solution and use it to clean the interior of the cold
water tank. Then, wipe the inside with the clean
cloth repeatedly until no detergent is left.
WARNING
Ensure that no water enters inside the appliance as
it may cause electric shock or damage electronic
components inside the appliance.
8
Perform the one of the following.

8-1 When not descaling internal components
Fill the cold water tank with water (approximately 4
L), open the hot water faucet until the water flows
via the hot water faucet to fill the hot water tank.
NOTE
If you are using the appliance for the first time, you do
not need to descale internal components.
13