Hitachi DH 24PC Handling Instructions Manual page 9

English
0 13 mm Hammer drill chuck
For drilling operations when using a straight shank bit for impact drilling with a hammer drill.
I Straight shank bit \
13 mm Hammer drill chuck
i
for impact drill
1
(SDS-plus shank)
Chuck wrench
2, Anchor setting (Striking only)
0 Anchor setting adapter (for electric hammer drill)
Anchor setting adapter (SDS-plus shank)
(for electric hammer drill)
Overall length: 160, 260 mm
1 Anchor size
I
w 114"
W5/16"
w3w
0 Anchor setting adapter (for manual hammer)
Anchor size
Anchor setting adapter
(for manual Hammer)
+
T
3. Large hole boring (rotation + striking)
0
Center pin, core bit, core bit shank and guide plate.
1
+n
D+
+
@@#-J=+
Guide plate) Center pin
Core bit
Core bit shank
(SDS-plus shank)
Center pin
(AI
Core bit (outer diameter)
I
25 mm
29 mm
32 mm
Core bit shank
Core bit shank (A)
Center pin (A)
35 mm
38 mm
Center pin (B)
Do not use core bits with
outer diameter of 25 mm
and
29 mm.
(BI
45 mm
50 mm
Core bit shank (B)
with guide plate
(The guide plate is not equipped with core bits
with outer diameter of 25 mm and 29 mm.)