Electrolux ENF2751AOW User Manual page 11

NOTE: When removing the door, watch
for washer(s) between the ceter hinge and
the bottom of the freezer door that may
stick to the door. Do not lose.
9. Unscrew the two special flange
self-tapping screws which are used
for fixing the middle hinge part, then
remove the middle hinge part that hold
the lower door in place.
10. Lift the lower door and set it on a non
scratching surface with the outside up.
NOTE: When removing the door, watch
for washer(s) between the ceter hinge and
the bottom of the freezer door that may
stick to. the door. Do not lose.
11. Remove the screw hole cover from the
left holes as illustrated and transfer
them to the uncover holes at the right
side.
12. Lay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
the lower hinge part by unscrewing the
special flange self-tapping screws.
13. It does not need to do any change on
lower hinge, this kind of hinge can be
used directly in reversing door swing.
14. Replace the lower hinge part to the
left side and fixing it with the special
flange self-tapping screws.Install both
adjustable bottom feet.
ENGLISH
11