Advertisement
1
Reference the washbasin
specification to establish the
position of mounting bolts,
mark the holes to be drilled for
the anchors.
5
When mounting the washbasin
into a wood stud wall, there
must be adequate bracing. We
recommend doubling up 2 x 6'
or 2 x 8's between the studs to
form a solid anchoring point.
Screw mounting bolts into the
predrilled holes with an
adjustable wrench. Screw in
the full length of the mounting
bolt, so that the lag thread is
no longer visible. Carefully
slide washbasin onto the
mounting bolts. Insert the
white plastic sleeve over bolt
and into the hole in the
washbasin. Install provided
washer and nut. Hand tighten
the nut, so the washbasin is
secure.
MAL_Happy D.2_H26365/15.04.1
2
Using a 3/8" and 5/8"
drill bit, drill the anchor
holes that have been marked.
6
Install the faucet and siphon.
3
The plastic anchors provided
are for concrete wall
applications.
7
Push and lock in pins, (1)
and remove the drawer. (2)
4
For wood stud walls, bolts
should be screwed into wood
backing.
8
Slide the vanity under the
washbasin. Tighten mounting
nuts with a wrench until the
washbasin is stable.
Advertisement
