Maximum Speed Button And Indicator - Quickie F35 R2 Instructions For Use Manual

7.10.3 Maximum speed button and indicator:

This shows the maximum speed setting for the wheelchair
when the dual attendant system has control. There are
five settings - setting 1 is the slowest speed and setting 5
is the highest speed. The speed setting is changed with
the speed button, (Fig.7.3-7.4).
If the control system is programmed for drive profile
operation, then the dual attendant system speed adjuster
will only adjust the speed within the selected profile.
Changing between drive profiles can only be achieved
using the VR2 main joystick.
WARNING!
To avoid unexpected or unintentional movement of
the wheelchair and to conserve battery power, it is
recommended that the control system is switched Off
when drive or seating adjustments are not being used.
Note: Always move the chair with care.
If the programming of the attendant drive profile (s) needs
adjustments to make it more convenient for the attendant
and/or the person sitting in the wheelchair, please contact
your Sunrise Service agent for adaptation.
If the direction of movement of the directional attendant
control needs to be altered, please contact your authorised
Sunrise Medical dealer for adaptation.
WARNING!
Do not attempt to program the wheelchair yourself.
Always consult a qualified health care professional.
Contact your Sunrise medical approved dealer for details.
Speed indicator
Maximum
speed button
Actuator
button
20
Quickie F35 R2 Rev.E
Control button
& Indicator
LED's
Fig. 7.4