Advertisement
9
Silicone nub
10
11
Make sure that the three small
silicone nubs on the silicone
casing are not pressed in after
cleaning, or the milk cannot be
properly frothed.
Simply press the silicone nubs
back out if necessary.
Reassemble the motor unit.
Once finished, make sure that
all parts are correctly con-
nected and secure.
Otherwise the milk cannot be
properly frothed!
Turn the lid clockwise as far as
it will go.
Place the motor unit back on
the milk carafe.
12
Please note: If you would like to treat your MILK MASTER and
freshen it up, take advantage of the MILK MASTER fresh set. It con-
tains all of the parts that come into contact with milk when milk is
being frothed.
Turn the motor unit clockwise
until firmly in place.
6/6
Advertisement
