Advertisement
6
7
Gears
Remove the silicone sleeve
from the milk spout adapter.
Carefully clean the different
parts illustrated here in warm
water with a little dish soap.
Use a soft toothbrush if neces-
sary.
All parts except for the milk
carafe and the motor unit
are also dishwasher-safe.
Clean the opening in the top of
the motor unit and the area
under the gears with warm
water and mild dish soap. Turn
the gears somewhat when
doing so to clean out any pos-
sible remaining milk residue
underneath. Warning! The
gears cannot be removed.
Carefully dry all parts or let
them dry overnight.
8
Wrap the silicone casing
back around the milk spout
adapter. Tip: If you moisten
the silicone casing with a
little water first, it can be
inserted more easily into the
openings in the adapter.
Firmly press in the silicone
casing on all sides so that it
is correctly inserted in all
openings in the adapter and
lies flat.
If the silicone casing does
not fully seal the milk
spout adapter, the froth
will not be able to thicken
and the milk will spray out
when being dispensed.
5/6
Advertisement
