Outdoor Temperature Signal Strength; Dashes Show For Outdoor Temperature; Power Requirements; Inaccurate Outdoor Temperature Reading - La Crosse Technology T83622 Faqs

4. Wait for 2 minutes for the outdoor temperature to appear on the wireless thermometer.

Factory Restart: If the above procedure does not work, please try the factory reset.

Outdoor Temperature Signal Strength

Explanation: The wireless thermometer will search for the outdoor temperature outdoor sensor for 3
minutes after batteries are installed or the MIN/MAX/+ button is held for 3 seconds.

The antenna symbol will flash during reception.

The temperature display will be dashes "---".

If synchronization fails once, the antenna will lose one bar.

If synchronization fails twice, the antenna will lose two bars.

If RF (radio frequency) reception fails five times, the antenna symbol will show without bars.

The antenna will show full display with successful RF (radio frequency) reception.

Dashes show for Outdoor Temperature

Explanation: Dashes mean the connection is lost between the wireless thermometer and the outdoor
sensor.

Batteries often resolve the connection.

Distance/Resistance
thermometer.
 Turn the wireless thermometer 90 degrees towards the outdoor sensor to provide better reception.
This allows more antenna surface to face the outdoor sensor signal.
 Try the
quick connect

Power Requirements

 2-AA
batteries power the outdoor sensor.
 We recommend Alkaline batteries for the outdoor sensor.
 You may choose to use Lithium batteries for temperatures below -20°F/-28.8°C.

Inaccurate Outdoor Temperature Reading

Explanation: High outdoor temperature readings are generally a location issue. Low outdoor temperature
readings are power related or a sensors going bad.
 The outdoor sensor reads the environment where it is mounted. When mounted inside the home, it
will read inside temperature.
 When the outdoor sensor reads high during the day, but not at night, it is a
 Look for heat sources such as sunlight, door or window frames or reflected heat.
Side-by-side test: Bring the outdoor sensor in the house and place it next to the wireless thermometer
for 2 hours.
 Compare indoor and outdoor temperature. The temperatures should be within 4 degrees to be within
tolerance.
 If the outdoor sensor reads correctly when next to the wireless thermometer, try a different location
outside.

Intermittent Outdoor Temperature

Explanation: Intermittent problems are the hardest to resolve. RF (radio frequency) communication may
come and go occasionally. This can be normal in some environments (e.g. moister climates). If outdoor
sensor signal is lost, please wait 2-4 hours for the signal to reconnect on its own.
 Move the outdoor sensor to a closer location.

Distance/Resistance
 Check
Batteries.
La Crosse Technology, Ltd.
can cause loss of connection between the outdoor sensor and the wireless
or factory restart.
can cause loss of outdoor sensor signal.
www.lacrossetechnology.com/support
positioning problem.
Page 3