Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
3
1
2
Connect speakers
1
Plug the two gray-blue cables into the
" HIGH CH " sockets as indicated by the
"+/-" symbols, right speaker to " R " and
left speaker to " L ".
2
Plug the two red-black cables into the
" LOW CH " sockets as indicated by the
"+/-" symbols, right speaker to " R " and
left speaker to " L ".
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage set on the voltage
selector on the back of the unit.
•
Before connecting the AC power cord, ensure you
have completed all other connections.
Note
•
The type plate is located on the back of the main unit.
HIGH
+
+
L
R
_
_
LOW
EN
7
Advertisement
Table of Contents
