Connect power
Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
•
The type plate is located on the back of the
main unit.
1
If your power supply voltage is 110V-
127V, adjust the voltage selector to 110V-
127V.
2
Connect the power plug to the wall
outlet.
Set the clock
1
In standby mode, press and hold
CLOCK .
The hour digits are displayed and begin
»
to blink.
2
Press /
on the remote control to set
the hours.
3
Press CLOCK .
The minute digits are displayed and
»
begin to blink.
4
Press /
to set the minutes.
5
Press CLOCK to confi rm the time.
Tip
•
During play, you can press
remote control to view the clock.
Turn on
1
Press
.
The unit switches to the last selected
»
source.
Switch to standby
1
Press
to switch the unit to standby
mode.
The backlight on the display panel is
»
reduced.
The clock (if set) appears on the
»
display panel.
DISPLAY on the
EN
11