Canon EOS-1D X Mark III Advanced User's Manual page 228

Multi-Spot Metering
By specifying multiple areas for spot metering, you can determine an overall exposure level
based on the average of your selected areas. Multi-spot metering is available in <
< >, and <
1.
Set the metering mode to <
2.
Press the <
Note
Spot metering with up to eight points is possible.
Stored exposure values are cleared in the following cases.
• When the metering timer elapses after the last spot metering (
• When you press any of these buttons: <
<
Multi-spot metering is available even when [
set to [Linked to active AF point] (
> modes.
> button (
Aim the spot metering circle over each area for exposure comparison,
one after another, and press the <
Relative exposure levels of each spot metering area are displayed at
right in the viewfinder. These levels are averaged to obtain the current
exposure level.
While referring to the three points on the exposure level indicator, you
can set exposure compensation in this state and determine the final
exposure level for the desired result.
>, < >, < >, <
> (spot metering).
).
> button in each area.
>, <
>, or < >
1: Spot meter. linked to AF pt] is
).
228
>,
)
>,