Cleaning And Maintenance; Technical Specifications - Velleman HQ-Power ORBITER VDP201GLD Manual

1 2 3
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
DMX value table
Start End
0
5
10
15
:
:
220 224
225 229
230 255
There are 45 patterns preset between value 5 and 229. Select patterns by changing the signal level as per above.
Values 230 – 255 is for music controlled operation.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp and the fuse (see "4. Installation").
8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Power Consumption
Fuse
Diode
Dimensions
Total Weight
Laser colour
Laser power
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
VDP201GLD
DIP switches chart
4 5 6
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
Set DMX start address
Laser Pattern Control
4 OFF
9 Pattern 1
14 Pattern 2
19 Pattern 3
: :
: :
Pattern 44
Pattern 45
Music controlled
max. 230Vac/50Hz
max. 30W
F2A, 250Vac (5x20mm) (order code FF2N)
20mW green laser diode / 532Nm
220 x 240 x 170mm
2,4kg
green
20mW, Laser Class IIIr
45°C
7 8 9
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
4
10 11 12
OFF OFF OFF
ON OFF OFF
(ON)
ON OFF
OFF OFF OFF
OFF OFF OFF
Function
Music mode
Auto mode
Master
Slave
DMX Mode
VELLEMAN