Tv Has An S-Video In Jack - Philips DVD623AT98 Owner's Manual

2
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's S-
VIDEO In jack.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. Match the cable
colors to the jack colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
4
Turn on the TV power. Set the TV to the correct S-Video
In channel. See your TV owner's manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
Connecting to a TV Only

TV has an S-Video In Jack

Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
Hookups (cont'd) 11
3
Helpful Hints
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or
S-VHS (super video).
• If your TV has a single Audio In
jack instead of separate left/right
Audio In jacks, you will need a
different audio cable. You need a
"splitter" audio cable to go from
the left/right AUDIO OUT jacks
of the DVD Player to the single
Audio In jack on your TV. See
your electronics retailer for
details.
• Set VIDEO OUTPUT to S-VIDEO.
Details are on page 34.