Stereo System Has Dolby I Left Audio In Jack; Optional: Connecting Digital; Receiver Has A Pcm, Dolby Mpeg2 Decoder - Philips DVP5140 User Manual

L
Connections
Optional: Connecting to an
Audio System
Optional: Connecting Digital AV
Receiver
O Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
@
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
Set the DVD Player's Digital Output to
PCM-ONLY orALL depending on the
capabilities of your Receiver (see page 34
"'Digital Output").
Helpful Hints:
- If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
14
001-47 DVP5140 Eng 37 RC2 14 11/07i06, 2:02 PM [