Connect; Connect Video Cables - Philips DVP3320X/77 User Manual

3 Connect

Make the following connections to use your
DVD player.
Basic connections:
• Video
• Audio
Optional connections:
• Route audio to other devices:
• Digital amplifier/receiver
• Analog stereo system
Note
•
Refer to the type plate at the back or bottom
of the product for identification and supply
ratings.
•
Before you make or change any connections,
ensure that all the devices are disconnected
from the power outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.

Connect video cables

Connect this DVD player to TV to view disc
play. Select the best video connection that the
TV can support.
• Option 1: Connect to component video
jacks (for a standard TV or Progressive
Scan TV).
• Option 2: Connect to video (CVBS) jack
(for a standard TV).
8 EN
Note
•
You must connect this DVD player directly to
a TV.
Option 1: Connect to component
video jacks
Pb
Y Pr
COMPONENT VIDEO OUT
1
Connect the component video cables
(not supplied) to the Y Pb Pr jacks on this
DVD player and the component video
input jacks on the TV.
• If a progressive scan TV is used, you
may turn on the progressive scan
mode.
Tip
•
The component video input jacks on the TV
may be labeled as Y Pb/Cb Pr/Cr or YUV.
• This type of connection provides good picture
quality.
Option 2 : Connect to video (CVBS)
jack
1
Connect a composite video cable
(supplied) to the TV OUT jack on this
Pr
Y
Pb
COMPONENT
VIDEO IN
VIDEO IN