Temperature Alerts; Arm | Disarm Alerts - La Crosse Technology T85647 Manual

Temperature Alerts

Tip: Setting the alerts is one step. Arming the alerts is a
separate step (see below).
• Hold the ALERTS button for 3 seconds until the remote HI alert
value flashes.
• Press and release the ARROW buttons to adjust the value. Hold to
adjust quickly.
• Press and release the ALERTS button to confirm and move to the
next alert.
Alert order:
1. Remote HI
2. Remote LO
3. Indoor HI
4. Indoor LO
Remote
HI
Remote
LO

Arm | Disarm Alerts

1. Press and release the ALERTS button so the remote HI alert
temperature shows and the word HI flashes.
• Press UP ARROW to arm
• Press DOWN ARROW to disarm
2. Press and release the ALERTS button to confirm and move to the
remote LO, indoor HI and indoor LO alerts.
3. A bell appears above and alert when armed.
4. If no alerts are active, OFF will show.
HI alert armed
T85847
LO alert armed
www.lacrossetechnology.com/support
Indoor
HI
Indoor
LO
Alerts OFF
Page | 6