Husqvarna RA850 Workshop Manual page 16

7. Put the bolt through the spacer, the press tool guide
and the collar. Refer to
8. Put the nut on the bolt. Refer to
page 8 .
9. Hold the nut and tighten the bolt.
10. Remove the special tool parts.
16 - Repair instructions
Servicing tools on page 8 .
Servicing tools on
11. Install the shaft (A) and the spacer (B).
12. Install the gear.
13. Install the lower connecting rod.
14. Install the crankshaft.
A
B
1048 - 002 - 18.09.2019